Moveable Walls | Teknion | Optos

Sophisticated aesthetic - seamless transparency with precision-fitted joins project a highly refined image

ba-designs-architectural-optos1

Functionality - two leveling ranges accommodate variations in floor surfaces

ba-designs-architectural-optos2

Integration - connects with Altos and interfaces with building architecture

ba-designs-architectural-optos3

Sustainability - design and materials support environmental responsibility

ba-designs-architectural-optos4
ba-designs-architectural-optos5

Moveable Walls | Teknion | Optos

Optos® is a seamless glass wall system with a refined design aesthetic.

Optos® is a seamless glass wall system with a refined design aesthetic. The wall provides full-height space division with extensive leveling tolerances, as well as visual and functional integration with Teknion’s Altos wall system.
The Optos curved feature extends planning capabilities, enabling Optos to be easily planned and specified along a curved path.
Simple in concept and intelligent in design, Optos features:
· Sophisticated aesthetic – seamless transparency with precision-fitted joins project a highly refined image
· Functionality – two leveling ranges accommodate variations in floor surfaces
· Integration – connects with Altos and interfaces with building architecture
· Sustainability – design and materials support environmental responsibility
Finish / Material Options
· Single 10mm center-mounted glass is available tempered or laminated
· Glass options include clear, frosted or graded-in glass from Teknion’s Vanceva program
· Trim surfaces are offered in anodized aluminum
· Reveals are available in clear anodized, platinum or black to coordinate with Altos

Optos with Vanceva
Glass 

Seamless Transparency
· Glass-to-glass joins use a unique transparent adhesive tape to minimize vertical joins and create a virtually seamless wall
· Glazed corners have a mitered edge employing the same joining method
· Three-way off-modular glass connections allow improved peripheral sight lines and more light transmission into and through office spaces

90-degree Corner

Refined Detailing
· Low profile, unobtrusive base and ceiling trim provides a high degree of fit and finish
· Mitered glass and minimal aluminum transitions provide a precision fit a joins

Three-way Off-Module
Connection
 
Functionality
Curved Wall
· Glass modules facet to each other along a radius
· Length and angle of modules vary to conform to the radius and can come to within ½ inch
· Modules available 20-36 inches wide (1/4-inch increments) and in 2, 4, 6, 8, 10 degree options 
- radii from 9’7” to 85’8.5” can be supported
· Optos’ 2mm transparent glass connections are carried through to the faceted modules
· Can be planned with articulating corners or Optos glass-to-glass corners
· Articulating corners (-10 degrees to + 10 degrees) provide additional planning options and provide on-site flexibility
· Variable angle wall start: 
- start a new wall at any angle between -45 degrees and +45 degrees 
- accommodates on-site dimensional variations of -1/4” to +3/8” in width

Advanced Leveling Ranges
· Two base designs offer two leveling ranges up to 1 1/8 and 2 inches
· Both options can be used within the same installation to accommodate point leveling and floor deviations

Two leveling ranges

Acoustical Performance
· Tempered glass 34 STC (sound transmission class)
· Laminate glass 35 STC
· Offers a balance of acoustic and territorial privacy while still transmitting light
· Offers acoustic seals on glass-connecting components and on doors

Relocatable
· Can be dismantled, moved and reused to extend product life cycle
· Integrated electrical infill panels accommodate lighting/switching requirements

Integration with Altos
· Optos connects with Altos to provide solid walls and support wall-mounted furniture
· Optos Clerestory modules integrate Optos storefronts with Altos demising walls; modules are used above 84 inches with Altos fascias below
· Optional black reveals on Optos coordinate with Altos reveals
· Optos walls connect to Altos at 180 degrees and 2-, 3-, and 4-way corners

Building Interface
· Walls can begin at the building perimeter, window mullions, columns, bulkheads or drywall surfaces for maximum planning flexibility
· Optos is available in 1-inch height increments to accommodate ceilings from 8 to 10 feet
· Glass is available in 1/8-inch width increments to ensure a precise fit

Sustainability
· Aluminum and steel components can be separated for end-of-life recycling
· Steel components contain recycled content
· Supports LEED initiatives by admitting natural light to the interior of a building while providing exterior views

Certification / Code Compliance
· Greenguard® Certified for Indoor Air Quality
· ISO 9001-2000 Quality Management System
· ISO 14001-2004 Environmental Management System
· CSA/UL certified

BA Designs